Note:
If you know the SSID of the desired AP, you can also input it into the field "SSID" manually.
4.
Click the Next button in Figure 3-12. You will then see the Finish page.
Because there are something changed on the Wireless page, you will see the Finish page
as shown in Figure 3-13. Click the Reboot button to make your wireless configuration to take
effect and finish the Quick Setup.
B.
When you choose AP Router on Choose Operation mode page in Figure 3-6 , take the
following steps:
1.
Click Next, and then WAN Connection Type page will appear, shown in Figure 3-14.
The Router provides Auto-Detect function and supports three popular ways PPPoE,
Dynamic IP and Static IP to connect to the Internet. It's recommended that you make use of
the Auto-Detect function. If you are sure of what kind of connection type your ISP provides,
you can select the very type and click Next to go on configuring.
2.
If you select Auto-Detect, the Router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the WAN port before detection. The
appropriate configuration page will be displayed when an active Internet service is
successfully detected by the Router.
TL-WR743ND
Figure 3-13 Finish
Figure 3-14 WAN Connection Type
- 15 -
150Mbps Wireless AP/Client Router