TP-Link TL-WR743ND User Manual page 23

1) If the connection type detected is PPPoE, the next screen will appear as shown in Figure
3-15.
2) If the connection type detected is Dynamic IP, the next screen will appear as shown in
Figure 3-17. Then you can go on with the wireless configuration.
3) If the connection type detected is Static IP, the next screen will appear as shown in Figure
3-16.
3. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-17.
TL-WR743ND
Figure 3-15 Quick Setup - PPPoE
Figure 3-16 Quick Setup - Static IP
- 16 -
150Mbps Wireless AP/Client Router