Command Line Options For Package Validation - Symantec WISE PACKAGE STUDIO 8.0 - REFERENCE V1.0 Reference

Option
/rd
Desired behavior
Open the Package Relationships
dialog box for the default
project.

Command Line Options for Package Validation

Option
/g
Desired behavior
Validate the default project .MSI
file.
Wise Package Studio Reference
Results
Required option to access the Package Relationships dialog box.
Examples
The following table shows how you would use the option above to access the Package
Relationships dialog box, using variables to provide information required by the
program.
See Wise Package Studio Variables
Note
These examples are shown as they would be entered at the command prompt. When
you define a command-line option in Tool Setup, you do not need to include the .EXE in
the command line.
Example command line
path\Manager.exe /rd /a="[ApplicationName]" /p="[PackageName]"
The following table lists the command-line option you can use with wfwi.exe to run
Package Validation.
See About Package Validation
Results
Required option to run Package Validation.
Examples
The following table shows how you would use the option above to run this tool, using
variables to provide information required by the program.
See Wise Package Studio Variables
Note
These examples are shown as they would be entered at the command prompt. When
you define a command-line option in Tool Setup, you do not need to include the .EXE in
the command line.
Example command line
path\wfwi.exe /g "[ProjectDir]\[FileName].msi"
Wise Package Studio Command Line Options
on page 75.
on page 145.
on page 75.
279