Command Line Options For Mobile Device Package Editor; Command Line Options For Package Distribution - Symantec WISE PACKAGE STUDIO 8.0 - REFERENCE V1.0 Reference

Desired behavior
Open the default project file
.LPR.
Command Line Options for Mobile Device Package
Editor
Desired behavior
Open the default project file
.INF.

Command Line Options for Package Distribution

Option
/tool="Package Distribution"
/srcfmt=
Wise Package Studio Reference
Note
These examples are shown as they would be entered at the command prompt. When
you define a command-line option in Tool Setup, you do not need to include the .EXE in
the command line.
Example Command-line
path\WiseForLinux.exe "[ProjectDir]\[FileName].lpr"
The executable that runs Mobile Device Package Editor is MDEditor.exe. There are no
options for running the executable.
See About Mobile Device Package Editor in the Mobile Device Package Editor Help.
You can use variables to provide a file to act upon, as shown in the following table.
See Wise Package Studio Variables
Note
These examples are shown as they would be entered at the command prompt. When
you define a command-line option in Tool Setup, you do not need to include the .EXE in
the command line.
Example command line
path\MDEditor.exe "[ProjectDir]\[FileName].inf"
The following table lists the command-line options you can use with workbench.exe to
run Package Distribution.
See Package Distribution
Results
Required option to run Package Distribution.
Specify the type of installation file to distribute. Options are:
MSI (to create an .MSI or .WSI)
WSE (to create a .WSE)
Place the option after the equals sign. This option is not necessary if
the source file is specified.
Wise Package Studio Command Line Options
on page 75.
on page 249.
277