Table of Contents
Advertisement
Adding subnet addresses to a host search on your mobile device
To edit an existing connection item, in the connection items list, select
the connection item.
To create a new connection item, on the command bar, tap New.
2
On the Properties screen, on the Ports tab, under Host data port, enter the
data port number that the host computer is using.
The Reset Default button returns the data port number to 5631, which is the
default setting.
3
Under Host status port, enter the status port number that the host computer
is using.
The Reset Default button returns the status port number to 5632, which is
the default setting.
4
To save your changes, on the title bar, tap OK.
Symantec pcAnywhere Mobile can search for the host computers that are running
on your local subnet (part of the network to which your device is attached). You
can expand this search to include multiple subnets. When you add a subnet address,
the results of the host discovery list are automatically available to all new and
existing connection items.
Symantec pcAnywhere Mobile searches for pcAnywhere hosts that are waiting
on the standard data port (5631). If a host is configured to use a different port,
you must include the port number in the connection item on your device.
See "Specifying the host ports for mobile connections" on page 282.
To add subnet addresses to a host search on your mobile device
1
On the main pcAnywhere Mobile screen, do one of the following:
2
On the command bar, tap Tools > Options.
3
On the Network tab, under Name, IP address, or IP subnet to search for hosts,
enter the following:
<nnn.nnn.nnn>.0
where <n> represents the numbers in the first three octets of the IP or subnet
address.
4
Tap Add.
5
Repeat steps 3 through 4 to add additional subnets to the host discovery list.
6
Tap OK.
Connecting from a mobile device
Ways to connect another computer from a mobile device
283
Advertisement
Table of Contents
