Symantec PCANYWHERE - V12.1 User Manual page 228

228 Monitoring and recording sessions
Monitoring events in Symantec pcAnywhere
application layer protocol that facilitates the exchange of management information
between network devices. It is part of the Transmission Control Protocol/Internet
Protocol (TCP/IP) protocol suite. Symantec pcAnywhere uses SNMP to send events
in the form of SNMPv1 traps to a compatible console, which records the events
that pcAnywhere generates.
To send logging events to an SNMP trap
1
In the Symantec pcAnywhere window, on the Edit menu, click Preferences.
In Windows Vista, the operating system might prompt you to approve this
action. You do not receive this prompt if you are logged on to the built-in
administrator account.
2
In the pcAnywhere Options window, on the Event Logging tab, check Enable
SNMP traps.
To find this tab, click the left and right arrows in the pcAnywhere Options
window to scroll through the tabs.
3
Click Add.
4
In the SNMP Trap Destination window, type the IP address of the trap
destination.
5
Click OK.
6
Click Select Events.
7
In the Select Events to Log window, select the events that you want to log.
8
Click OK.