288
Connecting from a mobile device
Navigating in the Symantec pcAnywhere Mobile session screen
Modifying navigation preferences during a mobile session
3
Tap, hold, and drag the screen in the direction that you want to move.
4
Tap ezScroll again to cancel ezScroll.
To navigate in the Symantec pcAnywhere Mobile session screen by using ezZoom
1
On the command bar, tap ezZoom.
2
Tap and drag the rectangular frame to the portion of the host screen that you
want to view.
When you release, the selected area is magnified.
To switch between full-screen view and magnified view
1
If the view is magnified, on the command bar, tap Screen scaling to view the
entire host screen on your device.
2
To switch back to the magnified view, tap Screen scaling again.
Symantec pcAnywhere Mobile offers navigational control options to facilitate
navigation during a remote control session. These options are automatically
activated when you start the connection unless you change the navigation
preferences.
You can change navigation preferences during a session or before you connect.
The procedures for configuring the navigation preferences are the same. These
options apply automatically to all connection items.