Symantec PCANYWHERE - OLE AUTOMATION GUIDE V 12.5 Manual page 43

Property
<CHostData>.ComParity(String)
<CHostData>.ComFlowControl(String)
<CHostData>.ComStartedBy(String)
<CHostData>.ComEndedBy(String)
In Table 2-23, replace the information in angle brackets with the actual values.
COM device properties and parameters
Table 2-23
Parameter Description
String Sets the communications parity
The following values are valid:
<None>
Odd
Even
Mark
Space
String Sets the flow control of COM-based connection
types
The following values are valid:
<None>
XONXOFF
RTS/CTS
Both
String Sets the start setting of COM-based connection
types
The following values are valid:
Always connected
Carrier detect (DCD)
Clear to send (CTS)
Data set ready (DSR)
Ring indicator (RI)
Receive 2 <CR>'s
Modem response
String Sets the end setting of COM-based connection
types
The following values are valid:
Always connected
Carrier detect (DCD)
Clear to send (CTS)
Data set ready (DSR)
Ring indicator (RI)
Visual Basic object definitions
CHostData properties
43