Symantec PCANYWHERE - OLE AUTOMATION GUIDE V 12.5 Manual page 22

22 Visual Basic object definitions
CRemoteData properties
Property
<CRemoteData>.ReadProtection(Bool)
<CRemoteData>.WriteProtection(Bool)
<CRemoteData>.LogSession(Bool)
<CRemoteData>.RecordFile(String)
<CRemoteData>.RecordSession(Bool)
<CRemoteData>.ReadObject(String)
<CRemoteData>.WriteObject(String)
Property
String = <CRemoteData>.ComputerName
String = <CRemoteData>.PhoneNumber
Bool = <CRemoteData>.UseDialingProperties
Integer = <CRemoteData>.RedialCount
CRemoteData properties and parameters (continued)
Table 2-3
The properties and return values for CRemoteData are shown in the following
table.
In Table 2-4, replace the information in angle brackets with the actual values.
CRemoteData properties and return values
Table 2-4
Parameter Description
Bool Sets the requirement of a password to view the
properties of the remote object. Set by
Password.
Bool Sets the requirement of a password to save
changes to the remote object. Set by Password.
Bool Activates and deactivates session logging.
String Sets the fully qualified path and name to the
location of the file that records the active
session.
Bool Activates and deactivates automatic session
recording.
String Sets the password of the object. Use this
property to refresh the local data copy of the
remote object.
String Sets the password of the object. Use this
property to create the remote object or to write
changes that you have made to the remote
object.
Return value Description
String Returns the computer name or IP address of
the host computer
String Returns the phone number of the host
computer
Bool Returns the system dialing properties that are
set in the remote object
Integer Returns the number of redial attempts that is
set in the remote object