Cremotedata Properties - Symantec PCANYWHERE - OLE AUTOMATION GUIDE V 12.5 Manual

CRemoteData properties

Property
<CRemoteData>.ComputerName(String)
<CRemoteData>.PhoneNumber(String)
<CRemoteData>.UseDialingProperties(Bool)
<CRemoteData>.RedialCount(Integer)
<CRemoteData>.RedialDelay(Integer)
<CRemoteData>.AutoLoginName(String)
<CRemoteData>.AutoLoginPassword(String)
<CRemoteData>.Password(String)
<CRemoteData>.ExecuteProtection(Bool)
The properties and parameters that are available for the CRemoteData object are
shown as follows.
In Table 2-3, replace the information in angle brackets with the actual values.
CRemoteData properties and parameters
Table 2-3
Parameter Description
String Sets the computer name or IP address of the
host computer.
String Sets the phone number of the host computer.
Bool Sets the system dialing properties.
Integer Sets the number of redial attempts before
cancelling the call.
Integer Sets the number of seconds to wait between
redial attempts.
String Sets the name of the user for automatic login.
For more information about using domain
logins:
See CRemoteDataEx object"
String Sets the password for automatic logins in the
remote object.
For security reasons, the pcAnywhere
Automation Server does not provide the ability
to read the password value. A password value
is not returned.
String Sets the password on the remote object for use
with the ExecuteProtection, ReadProtection,
and WriteProtection settings.
For security reasons, the pcAnywhere
Automation Server does not provide the ability
to read the password value. A password value
is not returned.
Bool Sets the requirement of a password to execute
the object. Set by Password.
Visual Basic object definitions
CRemoteData properties
on page 31.
21