Viewing Drive Details; Improving The Protection Level Of A Drive - Symantec GHOST - V 15.0 Manual

124 Monitoring the status of your backups

Viewing drive details

Viewing drive details

Improving the protection level of a drive

The Advanced page lets you view details about your hard drives.
You can view the following drive details:
Name Displays the name that you assigned to the backup when you defined
it.
Type Identifies the type of recovery point the backup creates when it runs.
Destination Identifies the storage location of the recovery point, or the location
in which the drive should be backed up.
Last Run Displays the day and time when the backup was last run.
Next Run Displays the day and time of the next scheduled backup.
To view drive details
1 On the Advanced page, on the Content Bar, click the Drives tab.
If the Advanced page is not visible on the Primary Navigation Bar, click View
> Show Advanced Page.
2
In the Drive column, select a drive.
3 Review the Details section below the Drives table.
When the status of a drive-based backup indicates that it needs attention, you
should take steps to improve the status.
You might need to add a drive to an existing backup, edit the schedule of a backup,
edit the settings of a backup, or define a new backup.
See "Best practices for backing up" on page 50.