Symantec GHOST - V 15.0 Manual page 79

7
In the Options panel, set the desired compression level for the recovery point.
None
Standard (recommended)
Medium
High
8
If you want to verify whether the recovery point is valid after its creation,
select Verify recovery point after creation.
9 In the Description text box, type a description that you want associated with
the recovery point.
10 Click Advanced.
11
In the Advanced options panel, set the options you want, and then click OK.
About running a one-time backup from Symantec Recovery Disk
Use this option if storage space is not an
issue. However, if the backup is being
saved to a busy network drive, high
compression may be faster than no
compression because there is less data to
write across the network.
This option uses low compression for a 40
percent average data compression ratio
on recovery points. This setting is the
default.
This option uses medium compression for
a 45 precent average data compression
ratio on recovery points.
This option uses high compression for a
50 percent average data compression ratio
on recovery points. This setting is usually
the slowest method.
When a high compression recovery point
is created, CPU usage might be higher
than normal. Other processes on the
computer might also be slower. To
compensate, you can adjust the operation
speed of Norton Ghost. This might
improve the performance of other
resource-intensive applications that you
are running at the same time.
Backing up entire drives 79