Table of Contents
Advertisement
Advanced Deploy Image options
Restoring a backup image
Deploy Image options (continued)
Table 5-7
Option
Credentials
The Advanced option on the Deploy Image task lets you configure additional
options.
See
"About deploying an image"
You can also set up other imaging options for this task.
See
"Deploy Image options"
Advanced Deploy Image options
Table 5-8
Option
Partition
Command-line
Multicasting
HTTP
The computers that you image are restored to the exact state they were in when
the image was created. A backup disk image can be restored only to the computer
from which it was captured.
Description
The credentials that are needed to join the computer to a
domain.
on page 61.
on page 62.
Description
Determines what partitions are deployed. You can change
the destination partition size by clicking the partition
number.
Lets you add command-line options for the imaging tool.
Lets you configure the number of computers to run the task
before the image is multicast. You can change the default
settings.
If the threshold count is 2, there must be at least two client
computers and one master computer before multicasting is
used in this session.
Multicasting is supported only with the RapiDeploy imaging
tool.
Adds the credentials that are needed to deploy an image
that was obtained from an HTTP site.
Imaging computers
Advanced Deploy Image options
63
Advertisement
Table of Contents
