Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 - V1 Manual page 30

30 Configuring Deployment Solution settings
Configuring deployment and migration settings
Deployment and migration settings options
Table 3-1
Step Action
Step 1 Configure your Sysprep options using the Sysprep
Imaging Configuration option.
Step 2 Add a license using the OS Licenses option.
Step 3 Create your PXE configuration using the
Symantec Boot Services (PXE) > Preboot
Configurations option.
Description
You can browse to and
upload the Deploy.cab
file.
See "About Sysprep
imaging" on page 32.
You can track all of
your licenses for all of
your operating
systems. You can also
add licenses on this
page.
See "Adding an OS
license" on page 33.
You can create your
PXE preboot
configuration settings.
From your
configuration settings,
a PXE image is also
created through a
task-based policy at a
site server level. You
can also set up a PXE
image for an
unmanaged computer.
See "Creating a PXE
preboot image"
on page 33.
You can configure your
PXE server in another
step.
See "About configuring
a PXE server"
on page 36.