Logging In - Cisco AIR-WLC4402-50-K9 Installation And Configuration Manual

Logging In

Logging In
Perform the steps below to log into the controller:
Enter a valid login and password to enter the CLI.
Step 1
The login and password functions are case sensitive. The default Administrative User login and
Note
password are admin and admin, respectively.
The CLI displays the root level system prompt:
Step 2
The CLI automatically logs you out without saving any changes after 5 minutes of inactivity. This
Step 3
automatic logout can be set from 0 (never log out) to 160 minutes using the following command:
Refer to the Navigating the CLI and Logging Out of the CLI sections in the Product Guide for more
information.
Cisco 4400 Series Wireless LAN Controllers - Installation and Configuration Guide
20
User:
Password:
(system prompt)>
The system prompt can be any alphanumeric string up to 31 characters. You can change it entering
the following command:
config prompt
(system prompt)>
Because this is a user-defined variable, it is omitted from the rest of this documentation.
config serial timeout
(system prompt)>
Installation and Configuration
78-17157-01