Logging Into The Controller - Cisco 2505 Getting Started Manual

Table 3 Startup Wizard Information (continued)
Wizard Setting
Enter a polling interval between 3600 and
604800 secs
Configuration correct?
5

Logging into the Controller

To log into the 2504 controller, follow these steps:
Enter a valid username and password to log into the controller CLI.
Step 1
The administrative username and password you created in the startup wizard are case
Note
sensitive.
Action
Enter the polling interval between 3600 and
604800 seconds.
This prompt only displays if YES was
Note
entered in the "Configure a NTP Server
Now?" prompt.
Enter yes if the configuration entered is correct.
Values are yes and no. If yes is entered. the
controller saves your configuration, reboots, and
prompts you to log in.
33