Sony PCWA-C800S - Wireless Lan Router Software Manual page 52

Peer-to-peer netw ork w ith data encryption (WEP) enabled.
Peer-to-peer netw ork w ith data encryption (WEP) disabled.
Currently connected peer-to-peer netw ork.
(This icon indicates that the netw ork has data encryption [WEP] enabled.)
Currently connected peer-to-peer netw ork.
(This icon indicates that the netw ork has data encryption [WEP] disabled.)
Registered peer-to-peer netw ork out of the communication range of your computer.
(This icon indicates that the netw ork has data encryption [WEP] enabled.)
Registered peer-to-peer netw ork out of the communication range of your computer.
(This icon indicates that the netw ork has data encryption [WEP] disabled.)
"Re gis te re d"
The red check mark indicates that the netw ork is registered.
(Example)
"Ne tw ork Nam e (SSID)"
Displays the unique ID for each w ireless netw ork.
"Signal Le ve l"
Displays the signal level as a number.
"Channe l"
Displays the frequency and communication channel being used by the netw ork.
Wire le s s ON/OFF
2.
Note
These buttons are not displayed if you are using Wireless LAN PC Card PCWA-C500 or PCWA-C300S.
"802.11b/g" button (if us ing the PCWA-C700, this button is "802.11b")
Enables/disables 802.11b/g or 802.11b (2.4 GHz) w ireless.
The O mark is green w hen this function is enabled and gray w hen disabled.
"802.11a" button
Enables/disables 802.11a (5 GHz) w ireless.
The O mark is green w hen this function is enabled and gray w hen disabled.
3. Othe r buttons
"Ne w " button
Allow s you to register a new w ireless netw ork.
"Edit"/"Re gis te r" button
Page 52