Table of Contents
Advertisement
Step 2
Choose the number of the handset you want to call on the handset.
Step 3
Press
During a three-party call, any party can end this call, and other parties still keep in call.
6.7 Answering a Call
When a call is received, the handset rings. If the incoming call can be identified, the
number of the caller also appears on the LCD.
To answer the call, press
details about how to enable the function, see "Performing Auto Answer" on page 29),
you can pick the handset to answer the call without pressing any keys. During the
conversion, the LCD shows the duration of the call.
6.8 Basic Settings for the Handset
Adjusting Display Contrast
To adjust the display contrast, do as follows:
Step 1
In standby mode, press
Step 2
Press
Step 3
Press
Step 4
Press
Step 5
Press
Locking the Handset Keypad
To lock the keypad, press and hold
Locked appears on the LCD.
To unlo
ck the keypad, press and hold
LCD.
When you lock the keypad, all the keys except the
call comes in, you can answer the call by pressing
is locked again.
to invite the third party.
. If you have enabled the Auto Answer function (for
or
repeatedly to select HS Settings and then press
or
repeatedly to select LCD Contrast, and then press
or
to set the value you like.
to save the settings..
to display the main menu.
in standby mode until a message saying HS
again until the icon
is locked. In that case, when a
. When the call ends, the keypad
28
.
.
disappears from the
Advertisement
Table of Contents
