Table of Contents
Advertisement
8. Select AES from the WPA encryption drop-down combo box.
9. Click Submit to save the settings.
Step 2
Enable the wireless configuration service on your computer, do as follows
(taking the Windows XP operating system as an example):
1. Right-click My Computer, and then choose Manage from the shortcut
menu.
2. In
Management (Local) > Services and Applications >Services.
3. From the services listed in the right pane of the Computer Management
window, right-click Wireless Zero Configuration, and then choose
Properties from the shortcut menu.
4. In the Wireless Zero Configuration Properties (Local Computer)
dialog box, check whether Service status is Started. If not, click Start.
5. Click OK to close the dialog box, and then close the Computer
Management window.
Step 3
Configure the wireless network connection on your computer, do as follows
(taking the Windows XP operating system as an example):
1. Choose Start > All Programs > Accessories > Communications >
Network Connections.
2. In the Network Connections window, right-click Wireless Network
Connection to display a shortcut menu, and then select View Available
Wireless Networks from the shortcut menu.
3. In the Wireless Network Connection Properties dialog box, select
Wireless Networks.
4. Select Use Windows to configure my wireless network settings.
5. Click View Wireless Networks.
6. In the Wireless Network Connection dialog box, select the WLAN with
the same name that is configured in Step 1, and then click Connect in the
lower right corner of the window.
7. In the displayed dialog box, enter the access password that is preset in
Step 1, and then click Connect.
the
Computer
Management
window,
19
choose
Computer
Advertisement
Table of Contents
