Dixon ZTR 1001 Operator's Manual page 14

TURNING:
Turning is controlled by moving one drive
control lever slightly up or down, forward or
rearward of the other.
To turn left, move left control lever up while
pushing downward on the right control lever.
To turn right, move right control lever up
while pushing downward on the left control
lever.
To turn on mower's own axis 'Zero Turning
Radius' stop and move one lever to reverse
or up position and the other to forward or
downward position. >,- • .
BRAKING:
To brake mower, move both levers in
direction opposite of travel, release levers to
move neutral setting. Set parking brake. Park
on level surfaces only.
TWIN FUNCTION THROTTLE CONTROL LEVER:
Located on control panel to operators right.
Throttle control for engine speed. Choking for
engine starting.
Throttle control should be set to the MAXIMUM
or wide open setting to insure adequate
cooling of the engine and to maintain mower
deck blade speed while mowing.
CONTROLS
90° RIGHT TURN
Page 11