Dixon ZTR 1001 Operator's Manual page 27

CARE AND MAINTENANCE - MODEL ZTR 1001
CAUTION
HOT oil may cause burns. Allow engine to cool before draining oil.
CHANGING THE ENGINE OIL:
1. The "snap lock" oil drain valve is located on the left side of the engine crankcase.
2. Place a suitable container under the drain valve. The fitting of a short piece of hose to
the valve will help direct the oil.
3. Pus/i the valve body in and twist to clear the detent notch.
4. Pulling
NOTE:
OIL FILL:
1. Push the valve body in and twist into the detent notch.
2. Clean any spilled oil from engine and chassis.
3. Refill engine with type, and quantity of oil recommended by the engine
manufacturer in engine literature.
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS
Page 24
\ valve body outward will start the fl ow of oil.
MC Q
Refer to engine manufacturers recommendations for frequency of oil
changes.
PROTECT YOUR ENVIRONMENT