Operation flow
Setup procedure
The operation flow of the decoder is as follows.
z
x
c
v
b
n
18
Rack Mounting
Connections
Startup
Network settings of a PC
Setup
Start operation
Install the decoder in the rack. (page 19)
Go to step 2 when not installing in the rack.
Connect PCs and cameras. (page 20)
Turn on the power of the decoder. (page 21)
Change the TCP/IP setting of the PC to conform to the set-
tings of the decoder. Refer to the setup instructions (PDF).
Perform the required settings on the setup menu to start
operation. Refer to the setup instructions (PDF).
Images from the registered camera will be displayed.