Table of Contents
Advertisement
Item
Block noise
Crosscut noise
Dot noise
Picture disruption
Picture
Not bright enough
Too bright
Flickering color
Color fading
7.2. Power Supply +5V Adjustment Procedure
1. When the T001, Q003 and D103 is replaced, adjust the "XSW5V" measuring point
(IP102-2) in the VR102 to the value between 5.12 - 5.15V.
8. Assembling and Disassembling
8.1. Disassembly flow chart
The following chart is the procedure for disassembling the casing and inside parts for
internal inspection when carrying out the servicing.
To assemble the unit, reverse the steps shown in the chart below.
Contents
Item
Distorted sound
noise (static, background noise,
etc.)
The sound level is too low.
The sound level is too high.
Sound
The sound level changes.
Contents
Check
Advertisement
Table of Contents
