Dixon BLOUNT 3301 Technical Data Brochure

Dixon lawn mower user manual

Download this manual

DIXON INDUSTRIES, INC. A

BLOUNT COMPANY AIRPORT

INDUSTRIAL PARK

PO BOX 1569

COFFEYVILLE KS 673370945

316 251 2000

FAX 316 251 4117

TECHNICAL DATA BROCHURE

Model 3301

IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATING OR MAKING ADJUSTMENTS

SEAT ADJUSTMENT

1. Pull or lift body retention latch P/N 3954

from transaxle backing plate, raise and

push body and seat assembly forward.

2. Loosen four seat bolts P/N 3006 and

slide seat forward or backward to

desired position.

3. Re-tighten bolts. DO NOT operate

mower without seat retention bolts

properly tightened.

4. Close upper body and push retention

latch P/N 3954 over transaxle backing

plate.

Page 1 of 8

Page 1 DIXON INDUSTRIES, INC. A BLOUNT COMPANY AIRPORT INDUSTRIAL PARK PO BOX 1569 COFFEYVILLE KS 673370945 316 251 2000 FAX 316 251 4117 TECHNICAL DATA BROCHURE Model 3301 IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATING OR MAKING ADJUSTMENTS SEAT ADJUSTMENT 1. Pull or lift body retention latch P/N 3954 from transaxle backing plate, raise and push body and seat assembly forward.
Page 2 BODY REMOVAL 1. The 3301 has a 2-piece polyethylene body. The upper body can be folded forward to expose the transaxle. In some cases, it may be necessary to remove t he upper body to service the transaxle. 2. To remove the upper body, remove two bolts P/N 3093 from the front of upper body hinge located on the brake shaft P/N 9283.
Page 3 IMPORTANT - PERFORM SAFETY CHECKS AFTER MAKING ANY REPAIRS OR ADJUSTMENTS 1. After reassembly, while seated on mower, attempt to start engine with mower deck engaged. Engine should not start. If engine does start, return the mower to an Authorized Dixon dealer for adjustment or repair.
Page 4 3301 BODY ASSEMBLY...
Page 5 3301 CHASSIS ASSEMBLY...
Page 6 3301 TRANSAXLE ASSEMBLY...
Page 7 3301 MOWER DECK ASSEMBLY 30”...
Page 8 3301 WIRING ASSEMBLY...