THUNDER TIGER S3 EB 4 RALLY GAME Manual page 29

SET UP
5.Rear Anti-Squat Adjustment: Adjust the rear anti-squat of
Rear Anti-Squat
Adjustment
Rear susp.
arm holders
RF 0
RF2
RF3
RF4
Camber
6.Camber Adjustment(Front): Adjust the front camber by adjusting
Adjustment
(Front)
Length(L)
Making longer.
Positive camber.
Making shorter.
Negative camber.
Note1: To expanding the adjusting range of the front camber,
you can also change the eccentric bushing in the upper plate
at the very front of the front bulkhead and the mounting holes
of hinge holders on the servo saver top plate.
Eccentric
bushings
Outer hole
Inner hole
Note2: Ensure you make equal adjustments on both left and
right sides of the car.
the rear lower arms by replacing the different plastic arms
suspension holders at the front of the rear bulkhead.
Characteristics
Less anti-squat, flat arm
Increases rear traction when cornering
Decrease rear traction when accelerating.
Easy handling on bumpy tracks
More anti-squat, leaning backwards
Decreases rear traction when cornering
Increases rear traction when accelerating
Easy handling on smooth or slippery tracks
the lengths of threaded parts of the front pivot balls in the upper
arms longer or shorter.
Steering Characteristics
Less steering
More steering
Servo saver
top plate
0˚~ 4˚
Camber adjusting range
of the front camber
More camber adjustment
Less camber adjustment
FRONT CAMBER
+ -