Wheels And Tires - THUNDER TIGER S3 EB 4 RALLY GAME Manual

15
P
b ag
PD1865 LITE SELF-LOCK WHL
HEX NUT, S3 OPT
PD0590 TIRE W/FOAM CUBIC, 1/8
PD1946-W 5-SPOKE WHL, 17mm YELLOW, 1/8
PD1946-Y 5-SPOKE WHL, 17mm YELLOW, 1/8
PD1946-B 5-SPOKE WHL, 17mm BLACK, 1/8
PD1946-G 5-SPOKE WHL, 17mm GREEN, 1/8
PD1946-P 5-SPOKE WHL, 17mm PINK, 1/8
PD1946-O 5-SPOKE WHL, 17mm ORANGE, 1/8
16

WHEELS AND TIRES

PD1981-W MULTI-SPOKE WHL, WHITE, 1/8
PD1981-Y MULTI-SPOKE WHL, YELLOW, 1/8
PD1981-B MULTI-SPOKE WHL, BLACK, 1/8
PD1981-G MULTI-SPOKE WHL, GREEN, 1/8
PD1981-P MULTI-SPOKE WHL, PINK, 1/8
PD1981-O MULTI-SPOKE WHL, ORANGE, 1/8
FOAM BUMPER INSTRUCTION
In order to fit the separated purchased body properly over the front foam bumper, a portion
of the bumper must be trimmed away depending on different body style. Use the supplied
1:1 scale paper template and an ink marker as show on the manual to outline the trimming
area on the front foam bumper. Then use a sharp hobby knife to cut the front foam bumper
following the mark outline.
Make sure your knife is sharp and big enough to cut into the bumper through from top
surface to the bottom. Remove all the unwanted material from the bumper. File the surface
of the foam smooth. (Hint: Or you may use a grinder for easy triming)
The bumper is now trimmed and properly fits the body that you chosen.
Apply CA glue on the
edges of four wheels to
adhere the tires.
1. Find the paper template in the bag.And then
cut the template accordingly.
2. Tentatively stick the paper template upon the
surface of the foam bumper.
3. Choose one outline to fit your body style. Use
an ink marker to outline the trimming area.
4. Use a sharp hobby knife to cut the front bumper
following the marked outline.
From G BAG
ø8