Operating Radio Steering Function; Reverse Function - THUNDER TIGER SLEDGE HAMMER S50 Manual

7

OPERATING RADIO STEERING FUNCTION

a
a. Check the radio steering functions. With the radio transmitter and receiver on, turn the steering wheel/stick to the left. The front
tires/wheels should turn left accordingly. If not, flip the steering servo reverse switch.
b. Return the steering wheel/stick to neutral. The front tires/wheels should point straight forward. If not, use the steering trim lever
to correct it.
c. Turn the steering wheel/stick to the right. The front tires/wheels should turn right accordingly.
a.
b.
c.
8
OPERATING RADIO THROTTLE/ BRAKE AND

REVERSE FUNCTION

a
d
a. Check the radio throttle/brake functions. With the radio transmitter and receiver on, pull the trigger/push the stick forward. The
carburetor should be fully opened and the brake disengaged. To reverse this function, flip the throttle/brake servo reverse switch.
b. Return the trigger/stick to neutral. The carburetor should be closed to a point where the idle has been set (see step for ADJUSTING
THROTTLE/BRAKE LINKAGE), and the brake still disengaged. If not, use the throttle/brake trim lever to correct it.
c. Push the trigger/pull the stick backward. The carburetor opening should still be the same at neutral, throttle spring compressed
slightly, and the brake engaged.
d. Press the Forward/Reverse Button. This will shift the truck into Reverse. Press the Forward/Reverse Button again to shift the
truck into Forward.
a.
b.
c.
d.
b
b
d
c
c
c