Table of Contents
Advertisement
Appendix: references
Back Panel description
AUDIO
ANT. IN
R
L
OUT
IN
RF OUT
CH
VIDEO
3
4
CH. 3/4 Switch Selects the channel to which you will tune
the TV to see the VCR picture if you connect the VCR using
one of the basic hookups.
AUDIO (R and L) and VIDEO IN Jacks Receives signals
from another component, like a VCR or camcorder, when it
is connected to these jacks. Use INPUT on the remote to select L1
to record from these jacks.
AUDIO (R and L) and VIDEO OUT Jacks Sends signals
from VCR to another component, like a TV or VCR, when it
is connected to these jacks.
ANT. IN Jack Receives a signal from an antenna or cable
system when attached.
RF OUT Jack Passes signal to TV using the cable supplied.
62
Advertisement
Table of Contents
