Table of Contents
Advertisement
Appendix: references
Troubleshooting Tips (Cont.)
Stereo audio too noisy
•
Stereo signal is weak. Set reception: STEREO/SAP/MONO feature
to MONO.
•
Press one of the TRACKING up or down buttons to minimize the
noise.
Index and Go-To search features do not operate
•
Check to see if MOVIE
Cannot access MOVIE
•
Cassette must have safety tab removed and be recorded in SP speed.
•
Home Recording was selected for the tape type in the menu. Eject
cassette and reinsert.
VCR forwards through commercials or
momentarily displays a blue screen during
playback.
•
Commercial Advance Playback feature is set to AUTO. Set it to
MANUAL.
COMMERCIAL
commercials when:
•
The Marking feature is set to OFF in the COMMERCIAL ADVANCE
menu. Set it to ON.
•
A recording is less than 15 minutes or the commercial is longer than
one minute.
•
A single isolated commercial can not be marked.
•
Recording started in the middle of a commercial segment.
•
A commercial group within the first or last two minutes of a
recording.
•
Accuracy and effectiveness can vary depending upon program
content and the characteristics of the commercials.
•
A commercial is between 30-and-45 seconds and 45-and-60 seconds.
•
Effectiveness may vary when local television stations insert their
own commercials.
Commercials recorded even though COMMERCIAL
ADVANCE feature was set to ON.
•
COMMERCIAL
mark them, and then skip over the marked commercials during
playback.
66
ADVANCE feature is activated.
ADVANCE feature
ADVANCE feature does not mark
ADVANCE is designed to record the commercials,
Advertisement
Table of Contents
