Download Print this page
Onkyo SKS-4700 Instruction Manual
Onkyo SKS-4700 Instruction Manual

Onkyo SKS-4700 Instruction Manual

Onkyo speaker system instruction manual

Advertisement

Quick Links

SPEAKER SYSTEM
SKS-4700
Thank you for your purchase of the Onkyo speaker system.
Please read this manual thoroughly before using it.
Following the instructions in this manual will enable you to
obtain optimum performance and listening enjoyment from
your new speaker system.
Please retain this manual for future reference.
Before using this unit
● The speaker cabinet is made of wood and is therefore sensitive to
extreme temperatures and humidity. Avoid placing the speaker
systems in locations subjected to direct sunlight, or in smoky or in
humid places, such as near an air conditioner, humidifi er, bathroom,
or kitchen. Doing so may result in damage to the speaker.
● Place the unit on a rigid, level surface. Placing it on a slanted
surface or weak base not only may cause the unit to fall, but
also results in decreased sound quality.
● Be sure to turn off your amplifi er before connecting the speaker
system. Connecting them with the amplifi er's power on may result
in damage to the amplifi er or the speaker system.
● Keep water or other liquids away from the unit. If water is spilled
into the unit, not only the unit but also the speakers themselves
may be damaged.
Precaution on use
● This speaker system can handle the specifi ed input power when
it is used for ordinary music reproduction. If the following abnormal
signals are fed to the speaker, however, an overcurrent may
fl ow in the internal circuits, causing burning or breakage of the
wires even if the input power is below the specifi ed rating.
1. Noise produced when FM station is not tuned in
2. Sound produced when fast-forwarding cassette tape deck
3. High-frequency sound generated by an oscillator, an
electronic musical instrument, etc.
4. Oscillating amplifi er signals
5. Special test signals produced by audio checking CD, etc.
6. Sound produced when connecting or disconnecting audio
connection cables (Always turn off the amplifi er's power
before connecting or disconnecting cables.)
7. Howling when a microphone is used
● Do not place magnetic objects such as screwdrivers and iron
parts near the tweeter since they use speakers with strong
magnets. Otherwise, the objects may be attracted, causing
injury or damaging the diaphragm.
Model name
Center speaker system
SKC-4700 × 1
Surround speaker system
SKM-4700 × 2
Connections
● Turn the sound volume to the minimum and disconnect the power
cord from the amplifi er before connecting the speaker cables.
● The nominal impedance of this speaker system is 8 Ω. Use
only amplifi ers capable of handling this impedance.
● Use the supplied speaker cables to connect between speaker's
input terminals and the amplifi er's speaker
terminals as illustrated on the right.
● Connect the speaker cables securely to the
terminals, with the core wires twisted
properly. In this case, make sure that the
core wires do not touch each other. Note
that a short circuit in core wires may result
in damage to the amplifi er.
Instruction Manual
Connecting to AV amplifi er
1. Strip the insulation of speaker cables,
and twist the core wires tightly.
2. While pressing the lever, insert the
wire into the hole, and then release
the lever.
3. Make sure that the terminals are
gripping the core wires, not the
insulation.
SKF-4700
Front right speaker
SKC-4700
+
Center speaker
Red
AV amplifi er
SURROUND BACK
SURROUND
SPEAKER
SPEAKERS
Gray
+
SKM-4700
Surround right speaker
Before turning on the amplifi er's power switch:
● Make sure that the positive (+) and negative (-) speaker cables
do not contact each other. Otherwise, a short-circuit may occur,
causing damage to the amplifi er.
● Be sure to connect the speaker cables with correct polarity
(connect the speaker's positive (+) and negative (-) binding
posts with the amplifi er's corresponding speaker terminals).
Reversed polarity results in impaired bass-range reproduction,
causing mislocalization of the sound image. Also, be sure to
connect the Right and Left speakers with the amplifi er's
corresponding speaker terminals.
● Pull lightly on the speaker cables to ensure that they are
connected fi rmly.
SKF-4700
Front left speaker
+
+
Green
White
FRONT
CENTER
SPEAKERS A
SPEAKER
L
R
Blue
+
SKM-4700
Surround left speaker
E
n

Advertisement

loading
Need help?

Need help?

Do you have a question about the SKS-4700 and is the answer not in the manual?

Questions and answers

Summary of Contents for Onkyo SKS-4700

  • Page 1 SPEAKER SYSTEM SKS-4700 Thank you for your purchase of the Onkyo speaker system. Please read this manual thoroughly before using it. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new speaker system.
  • Page 2 TV set because of the combined effect. Your Onkyo speakers are fi nished with a very high quality polymer laminate covering that serves to protect the wood speaker cabinet.
  • Page 3 扬声器系统 SKS-4700 非常感谢您购买Onkyo扬声器系统。 在使用之前,请详细阅读本使用手册。 遵照本使用手册的指示和说明进行操作,将使您通过新购置的扬 声器系统,得到最佳的音响效果和听觉享受。 请妥善保管本使用手册,以备将来参考。 使用本系统之前 ● 本扬声器的箱体是木质的,因此,对极高(或极低)的温度和 湿度非常敏感。请不要将扬声器系统放置在阳光直射之处,或 多烟尘和高湿度的地方,如靠近空调机、加湿器、浴室或厨房 中。否则,将会损坏扬声器。 ● 请将系统放置在牢固的水平表面上。若将其放置在斜面上或放置 不稳,则不仅会有扬声器系统跌落的危险,还会降低其音质。 ● 在连接扬声器系统之前,请务必先关闭您的放大器。若在放大 器电源打开的状况下进行连接,则可能会损坏放大器或扬声器 系统。 ● 请注意不要让水或其它液体溅入本系统。如果有水溅入本系 统,本系统和扬声器都有可能受到损坏。 使用注意事项 ● 当本扬声器系统被用来进行普通的音乐再现时,可以承受一定 的输入功率。但如果下述异常信号被输入扬声器,即使其输入 功率低于最大输入功率,也有可能在内部电路中产生过大的电 流,使线路烧毁或损坏。 1. 当收听调频广播未调准电台时产生的噪音 2. 当盒式录音带快进时产生的声音 3. 由振荡器、电声乐器等产生的高频音响 4. 振荡的放大器信号 5. 由音频测试CD等产生的特殊测试信号 6. 在连接或拆除音频连接线时产生的声音(请务必在连接或...
  • Page 4 ONKYO CHINA LIMITED Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung, N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/ SN 29344553 (C) Copyright 2007 ONKYO CORPORATION Japan. All rights reserved. 通常,应用于彩色电视机等的阴极射线管是极为敏感的,它们甚至会 受到地球磁场的影响。如果扬声器系统靠近它们,则会产生色调混乱 或图像失真。为了能够和彩色电视机等同时使用,本扬声器系统进行 了磁场屏蔽。 但是,即使进行了屏蔽,根据安装的环境,也有可能发生色调混乱。...