Download Print this page
Onkyo SKF-4600 Instruction Manual

Onkyo SKF-4600 Instruction Manual

Speaker system skf-4600, sks-4600

Advertisement

Quick Links

Speaker System
SKF-4600
SKS-4600
Instruction Manual
Thank you for your purchase of the Onkyo speaker
system.
Please read this manual thoroughly before using it.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new speaker system.
Please retain this manual for future reference.
Before using this unit
• The speaker cabinet is made of wood and is therefore
sensitive to extreme temperatures and humidity.
Avoid placing the speaker systems in locations
subjected to direct sunlight, or in smoky or in humid
places, such as near an air conditioner, humidifier,
bathroom, or kitchen. Doing so may result in damage
to the speaker.
• Place the unit on a rigid, level surface. Placing it on a
slanted surface or weak base not only may cause the
unit to fall, but also results in decreased sound
quality.
• Be sure to turn off your amplifier before connecting
the speaker system. Connecting them with the
amplifier's power on may result in damage to the
amplifier or the speaker system.
• Keep water or other liquids away from the unit. If
water is spilled into the unit, not only the unit but also
the speakers themselves may be damaged.
Precaution on use
• This speaker system can handle the specified input
power when it is used for ordinary music
reproduction. If the following abnormal signals are fed
to the speaker, however, an overcurrent may flow in
the internal circuits, causing burning or breakage of
the wires even if the input power is below the
specified rating.
1. Noise produced when FM station is not tuned in
2. Sound produced when fast-forwarding cassette
tape deck
3. High-frequency sound generated by an oscillator,
an electronic musical instruments, etc.
4. Oscillating amplifier signals
5. Special test signals produced by audio checking
CD, etc.
6. Sound
produced
when
disconnecting audio connection cables (Always
turn off the amplifier's power before connecting or
disconnecting cables.)
7. Howling when a microphone is used
• Do not place magnetic objects such as screwdrivers
and iron parts near the tweeter since they use
speakers with
strong magnets. Otherwise, the
objects may be attracted, causing injury or damaging
the diaphragm.
connecting
or
E
n

Advertisement

loading
Need help?

Need help?

Do you have a question about the SKF-4600 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Onkyo SKF-4600

  • Page 1 (Always turn off the amplifier’s power before connecting or Thank you for your purchase of the Onkyo speaker disconnecting cables.) system. 7. Howling when a microphone is used Please read this manual thoroughly before using it.
  • Page 2 SKF-4600 Model name SKF-4600 1. Strip the 2. Loosen the 3. Fasten the Front speaker system × 2 insulation of terminal screw, and terminal speaker insert the wire into screw. SKS-4600 cables, and the hole (until the SKC-4600 × 1...
  • Page 3 Speaker care Your Onkyo speakers are finished with a very high quality polymer laminate covering that serves to protect the wood speaker cabinet. Wipe the cabinet periodically with a dry, silicon-embedded or plain soft cloth.
  • Page 4 Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.onkyo.net ONKYO CHINA LIMITED Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung, HOMEPAGE N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.onkyo.com/ SN 29343615 D0309-1 (C) Copyright 2003 ONKYO CORPORATION Japan. All rights reserved.

This manual is also suitable for:

Sks-4600Skc-4600