Installing Or Replacing A Memory Module - Lenovo 098118U Installation And User Manual

7. Pivot the PCI card latch to the closed position to secure the PCI card.
Figure 10. Installing a PCI card
What to do next:
v To work with another piece of hardware, go to the appropriate section.
v To complete the installation or replacement, go to "Completing the parts
replacement" on page 44.

Installing or replacing a memory module

Attention
Do not open your server or attempt any repair before reading and
understanding the "Safety" on page v and the Safety Information book. To
obtain a copy of the Safety Information book, go to:
http://www.lenovo.com/support
This section provides instructions on how to install or replace a memory module.
Your server has four slots for installing or replacing memory modules. When
installing or replacing a memory module, use the following guidelines:
v Use DDR3 ECC UDIMMs for your server.
v Use 1 GB, 2 GB, or 4 GB memory modules in any combination up to a
maximum of 16 GB system memory.
v Install memory modules in the sequence of DIMM 1, DIMM 2, DIMM 3, and
DIMM 4. See "System-board internal connectors" on page 14.
Chapter 5. Installing or replacing customer replaceable units
23