Table of Contents
Advertisement
Show Thresholds button
Hide Thresholds button
Refresh
View Event Log
The Event Log page shows the event logs.
The figure below lists the available options on this page:
Event Log Category drop-down list
Event Log list
Clear Event Log button
Configuration of settings
The Configuration page is used to configure network, users and alerts.
The following server's management options are included:
• Alerts
• Mouse Mode
• Network
• SMTP
• Users
• BMC Sensor
• Date/Time and NTP Server Setting
• SSL Certificate
Alerts
You can use this function to modify or delete the alert settings, or send a test alert to the destination.
The Alerts page lists all the configurable alerts including configured alerts setting which contain the alert
level and destination address.
Step 1.
If you need to modify the alert settings, you can select an alert and click Modify to configure it.
Step 2.
Make settings to the available options on this page:
16
ThinkServer RD230 and RD240 Remote Management User Guide
Option
Option
Task Description
Click it to open the list and show the assigned value of
the thresholds at the same time. From this, you can see
CT, NC and NR value of the selected sensor. You can
move the display window from left to right by the scroll
bar at the bottom of the page.
Click it and back to the initial screen and hide thresholds
at the same time.
Click it to refresh the selected sensor readings.
Task Description
Used to select the event log categories shown on the list.
Used to show the names, status and readings of the
selected sensors. It includes a list of events with ID,
timestamp, sensor name, sensor type and description.
Click it to clear the event log.
Advertisement
Table of Contents
