Scanner Settings - Image Quality; Scanner Settings - Paper Size; Scanner Settings - Use The Scanner Driver To Make Advanced Settings - Canon CanoScan N1240U Manual

Chapter 2
Using the Toolbox

Scanner Settings - Image Quality

This setting determines the resolution (fineness) at which a
scanned image is reproduced. Resolutions from 75 to 1200
dpi are available with this setting.
e
Important
• This setting is not available when the Color (Multi-Photo
Mode) is selected in the Image type category. (Windows
only)

Scanner Settings - Paper Size

You can select from among the following paper sizes: A4,
A5 Portrait, A5 Landscape, B5, Letter, Executive, Statement
Portrait, Statement Landscape, Businesse Card, L Portrait,
L Landscape, LL Portrait, LL Landscape, Postcard Portrait,
Postcard Landscape and Custom.
e
Important
• The paper size setting is not available when the Color
(Multi-Photo Mode) option is selected in the Image type
category. (Windows only)
w w
Contents Index
36
Settings for the Scan-1 – Scan-3 Buttons (2/4)
When Custom is selected, a dialog
allowing you to specify the
dimensions will appear. After
selecting the units of choice, input
the dimensions and click the [OK]
button.
Scanner Settings - Use the Scanner Driver to Make
Advanced Settings
If this setting is left unchecked, clicking the [Scan] button at
the dialog's bottom right starts the scan process (Scan
Start linked application
immediately. If a check mark is placed beside the setting,
clicking the [Scan] button displays the ScanGear CS-U
window, allowing you to adjust various settings in detail.
f
Note
• When the Multi-Photo Mode is selected in the ScanGear
CS-U window, the Toolbox will transfer to the
application program the number of individual files
corresponding to the number of photos on the
document glass.
Previous View Next View
Transfer image file to application)
Previous Page Next Page