Chapter 1
Toolbox Basics
This topic explains how to start and close the Toolbox.
e
Important
• Before starting the Toolbox program, confirm that
ScanGear CS-U has been installed and the scanner
correctly connected.
Starting the Toolbox
Use the following procedures to start the Toolbox.
Windows
Click the Windows [Start] menu and select [Programs],
[Canon ScanGear Toolbox 3.0] and [Canon ScanGear
Toolbox 3.0]. (The screen shot below is from a system
running Windows Millennium Edition)
w w
Contents
Index
7
Starting/Closing the Toolbox (1/2)
This will start the Toolbox and display its main window,
which will appear similar to the example below.
Macintosh
Open the [ScanGear Toolbox] folder and double-click the
[ScanGear Toolbox] icon.
ScanGear Toolbox
This will start the Toolbox and display its main window,
which will appear similar to the example below.
Previous View
Next View
ScanGear Toolbox
Previous Page
Next Page