Previewing - Canon CanoScan FB 1200S User Manual

Previewing

When you use Plug-in Module CS-S as it was installed, automatic previewing of the
original will begin as soon as you start Plug-in Module CS-S. However, if [None] is
selected for the [Preview Settings] in the Preview Window Settings dialog, previewing
will not start automatically after the control panel opens so follow the procedure below
to start previewing.
Previewing scans the entire platen area to produce a temporary image of the original
before actual scanning. The previewed image is displayed in the preview window where
it can be cropped or enhanced to make changes that will be reflected in the scanned
image.
Procedures
Click on the [Preview] button.
• The image will be scanned and appear in the preview window.
Hint
• To change the size of the preview window, use the [Window Size] settings in
the Preview Window Settings dialog.
• The Dynamic Preview function enables changes to settings, such as the scan
mode and brightness, to be immediately reflected in the preview image.
• Nevertheless, the preview image provides only an approximation of the scan
and the final results may differ to some degree from it.
21
21
S T E P 2