Adjusting Color Balance - Canon CanoScan FB 1200S User Manual

Adjusting Color Balance

You can enhance color matching by adjusting the color balance of one or all of the
three primary colors, red, green and blue (RGB). Use this feature to adjust color balance
when you see an over abundance of a color in a scanned image.
Hint
• You cannot use this feature with the black and white or grayscale scan modes,
or with the 24-bit color scan mode when ColorSync
• There may be wide differences in the contrast and hue of the display image
and printout, depending on the monitor and printer settings. You may have
to adjust the settings and execute some test prints to attain the best match
between what you see in the image on the display and in the printout.
Procedure
Click the color balance tab in the Tone adjustment dialog.
Adjust the color balance for each or all of the primary colors, red, green
and blue (RGB).
To restore all values to their default values, click this [Reset] button.
To restore the color balance values to their default values, click this button.
Click the [OK] button.
Adjust the color by dragging the slidebar left or
right.
Click the up or down arrow in the spinbox to
increase or decrease the number value or enter
a number directly into the entry box (-127~127).
After adjusting the color balance, you can save
the settings to a file under a file name and load
the file again whenever you want to use the
settings.
49
49
S T E P 4
TM is selected..