Canon CanoScan FB 1200S User Manual page 14

Procedures
Follow the procedures below to install Plug-in Module CS-S by itself.
Caution
If Plug-in Module CS-S has already been installed according to the instructions
in the Getting Started Guide, there is no need to perform the following proce-
dures.
Place the CanoScan Setup Utility CD-ROM into the computer's CD-ROM drive.
Language select window will display to select your language, then the CanoScan
Setup Utility menu window will display.
• If the CanoScan Setup Utility does not automatically start, double-click the
[CanoScan FB1200S] icon, followed by the [setup] icon.
Click the [Install Software] button.
The software installation window will display.
Click the [No] button to display
the Install window.
14
14
S T E P 1