Scangear Toolbox Functions; The Toolbar - Canon CanoScan D1230UF User Manual

ScanGear Toolbox Functions

The Toolbar

Scanner
Select your scanner.
Mail Button
Scans an image and attaches it to a mail message.
Fax Button
Scans an image and sends it to the fax driver.
The following conditions are required for the buttons shown above to display and function.
Fax: A fax modem must be connected and its software installed.
Mail: A mail program that supports MAPI
Copy: A printer must be connected and an appropriate driver installed.
Scan (1-3): The application programs provided on the CanoScan Setup CD-ROM must be
installed.
• Images sent to applications are limited to the Color (24 bit), Grayscale (8 bit) or Black
and White (1 bit) formats. ScanGear Toolbox does not support the Color (36/42/48
bit) or Grayscale (12/14/16 bit) modes.
• In film mode, the fax and mail functions are not available. OCR programs installed
from the CanoScan Setup CD-ROM are also not supported in this mode.
Mode
Select whether the scan is performed from the platen (platen
mode) or the Film Adapter Unit (film mode).
This option will not display with a scanner that does not
support a Film Adapter Unit.
Save Button
Scans an image and saves it to a file.
Copy Button
Scans an image and sends it to a printer.
Link Button
Easy Scan Button
Scan (1-3) Buttons
Scans an image and sends it to a linked
application program.
(p. 22) must be installed.
Links the driver or
application program used
by each of the function
buttons (p. 29).
Use these buttons to set
the settings for Easy
Scan (p. 14).
9