Canon CanoScan D1230UF User Manual page 18

Film Mode
In film mode, the following dialog will appear when you click the [Easy] button under
each function while it is Off. This can be used to set the settings for the Easy Scan
function. Once you have selected the settings, click the [OK] button. The settings will be
effective and the [Easy] button will remain depressed.
Copy Dialog
Film type
Select from among Color Negatives, Color
Positives, Monochrome Negatives, and
Monochrome Positives. ScanGear Toolbox
only supports 35 mm film (strips or slides).
Image quality
Select from among Draft, Standard, High
Quality or Super-High Quality.
Scan frame type
(Your scanner model and optional
equipment will determine whether or not
this category appears.)
Select Sleeve or Mount.
Frame select button
These buttons will appear if [Sleeve] is
selected in the Scan frame type category.
Select the frame(s) for scanning. If more
than one is selected, the selected function
(fax, copy, etc.) will be repeated as many
times as the number of frames selected.
Copy layout
When more than one frame is selected,
you can set the paper size and print size to
position the image(s) on the page. Please
see P.20 for details.
18