Starting And Closing Scangear Toolbox; Starting Scangear Toolbox; Closing Scangear Toolbox - Canon CanoScan D1230UF User Manual

For canoscan color image scanners

Hide thumbs Also See for CanoScan D1230UF:

Table of Contents

Starting and Closing ScanGear Toolbox

Using the Scanner's Start Button

Start ScanGear Toolbox by pressing the Start Button on the front of the scanner or the

Film Scan Button on the top of the Film Adapter Unit.

• The availability of the scanner's Start Button or Film Adapter Unit's Film Scan Button

will depend upon the scanner model in use.

• ScanGear Toolbox starts in platen mode when the scanner's Start Button is pressed. If

you have a Film Adapter Unit equipped scanner, pressing its Film Scan Button will start

ScanGear Toolbox in film mode.

Starting ScanGear Toolbox Manually

Start ScanGear Toolbox with the following method if your scanner is not equipped with

a Start Button or Film Adapter Unit.

Click the Windows [Start] menu and select [Programs], [Canon ScanGear Toolbox 2.6]

and [ScanGear Toolbox 2.6].

• The ScanGear Toolbox toolbar will appear.

You can close ScanGear Toolbox with clicking

toolbar.

Starting in Platen Mode

Starting in Film Mode

(close box) at the upper right of the

Table of Contents

Canoscan d2400uf Scangear toolbox 2.6