Linux Redhat 6.X And 7.X; Lsi Scsi Driver Installation; Intel 82559 Network Driver Installation; Ati Rage Xl Display Driver Installation - Asus TR-DLSR User Manual

5. OS Driver Installation

7. Linux RedHat 6.x and 7.x

I. LSI SCSI Driver Installation
The LSI SYM53C896 SCSI drivers are bundled under Linux RedHat 6.x and 7.x
systems. User can easily follow the Linux RedHat 6.x and 7.x installation procedure
to finish the system installation. However, for the SYM53C1010 controller, user
must rebuild a new OS kernel (Redhat 6.x) or load the LSI driver (Redhat 7.x) to
support the SYM53C1010 controller.
For the kernel rebuilding procedure to support Redhat 6.x, check the README file
from the ASUS support CD in the following path:
\SDMS\DRIVERS\UNIXES\LINUX\README
To support Redhat 7.0, download the LSI 1010 driver REDHAT70.EXE from the
ASUS website www.asus.com.tw/products/addon/scsi/scsilan_drv.html. After
downloading the file, extract the driver into a floppy disk. In the Redhat 7.0 installation
wizard screen, use the "Linux dd" command to install Redhat Linux 7.0.
II. Intel 82559 Network Driver Installation
Linux RedHat 6.x and 7.x systems can automatically recognize the Intel 82559
controller during installation. User doesn't need to load or modify the network
driver for the onboard LAN device.
III. ATI Rage XL Display Driver Installation
Select "ATI Xpert XL" in installation stage to support X Window on Linux RedHat
6.x. User can also change the graphics driver later by executing the "setup" instruction
under the command prompt. The Redhat 7.x can automarically detect the onboard
graphics.
ASUS TR-DLSR User's Manual
100