Page 2
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
Radio Interference Regulations of the Cana- dian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. ASUS TUSI-M User’s Manual...
1.2 Item Checklist Check that your package is complete. If you discover damaged or missing items, contact your retailer. Optional Items Package Contents ASUS 3-port USB connector set (1) ASUS Motherboard with bracket (1) 40-pin 80-conductor ribbon ASUS consumer infrared set...
2. FEATURES 2.1 The ASUS TUSI-M The ASUS TUSI-M motherboard is carefully designed for the demanding PC user who wants advanced features processed by the fastest processors. 2.1.1 Specifications • Latest Processor Support ® Intel Pentium 100/133MHz FSB Coppermine core FC-PGA Intel Celeron™...
CMI8738 thus meets PC98® requirements, and supports professional digital audio interface and 4-channel speaker. • Smart Networking: Features the SiS630E 10/100Mb Fast Ethernet Controller, which supports Wired for Management, remote wake-up, and OnNow initiative to reduce Total Cost of Ownership (TCO). ASUS TUSI-M User’s Manual...
• ACPI Ready: ACPI (Advanced Configuration and Power Interface) is also imple- mented on all ASUS smart series motherboards. ACPI provides more Energy Saving Features for future operating systems (OS) supporting OS Direct Power Management (OSPM) functionality. With these features implemented in the OS, PCs can be ready around the clock, yet satisfy all the energy saving standards.
Millenium, Windows NT/2000, and OS/2, require much more memory and hard drive space to present enormous user interfaces and run large applications. The onboard hardware ASUS ASIC in conjunction with either the bundled ASUS PC Probe or Intel LDCM will warn the user before the system resources are used up to prevent possible application crashes.
Network Features SiS630ET Ethernet Controller 1 LAN (RJ45) Connector ..........(Top) 22 Wake-On-LAN Connector ............10 Wake-On-Ring Connector ............1 Other Features ASUS iPanel Connector ............9 ASUS iPanel Audio Connector ..........18 Power ATX Power Supply Connector ..........5 Form Factor microATX...
Page 13
2. FEATURES 2.2.1 Component Locations ASUS TUSI-M User’s Manual...
4. Place components on a grounded antistatic pad or on the bag that came with the compo- nent whenever the components are separated from the system. 5. Ensure that the ATX power supply is switched off before you plug in or remove the ATX power connector on the motherboard. ASUS TUSI-M User’s Manual...
Page 17
Disable or both to Enable. 2. These settings must also be set in conjunction with Wake On USB Device in 4.5.1 Power Up Control. USBPWR1 Enable Disable (Default) USBPWR0 ® TUSI-M Enable Disable (Default) TUSI-M USB Device Wake Up ASUS TUSI-M User’s Manual...
Page 19
[2-3] [2-3] [2-3] [2-3] For updated processor settings, visit ASUS’s web site: WWW.ASUS.COM WARNING! Premature wearing of the processor may result when overclocking. Be sure that the DIMM you use can handle the specified SDRAM MHz or else bootup will not be possible.
SDRAM chips are generally thinner with higher pin density than EDO (Ex- tended Data Output) chips. • BIOS shows SDRAM memory on bootup screen. • Single-sided DIMMs come in 16, 32, 64,128, 256MB; double-sided come in 32, 64, 128, 256, 512MB. ASUS TUSI-M User’s Manual...
60 Pins TUSI-M ® 20 Pins TUSI-M 168-Pin DIMM Sockets The DIMMs must be 3.3V Unbuffered for this motherboard. To determine the DIMM type, check the notches on the DIMMs (see figure below). 168-Pin DIMM Notch Key Definitions (3.3V) DRAM Key Position...
NOTE: Do not forget to set the correct Bus Frequency and Multiple (frequency multiple setting is available only on unlocked processors) for your Socket 370 processor or else boot-up may not be possible. Socket 370 processors provide internal thermal sensing: a socket mounted thermal resistor is not needed. ASUS TUSI-M User’s Manual...
4. Secure the card to the slot with the screw you removed earlier. 5. Replace the system cover. 6. Change the necessary BIOS settings, if any. (see section 4.4.3 PCI Configuration to change the settings.) 7. Install the necessary software drivers for the expansion card. ASUS TUSI-M User’s Manual...
There are two types of AMR, one defined as primary and another de- fined as secondary. You can only use primary AMRs with this motherboard. NOTE: An AMR is not included with this motherboard. TUSI-M ® TUSI-M Audio Modem Riser (AMR) Connector ASUS TUSI-M User’s Manual...
This connection is for a standard keyboard using an PS/2 plug (mini DIN). This connector will not allow standard AT size (large DIN) keyboard plugs. You may use a DIN to mini DIN adapter on standard AT keyboards. PS/2 Keyboard (6-pin female) ASUS TUSI-M User’s Manual...
Page 27
5) Parallel Port Connector (Burgundy 25-pin PRINTER) You can enable the parallel port and choose the IRQ through Onboard Parallel Port (see 4.4.2 I/O Device Configuration). NOTE: Serial printers must be connected to the serial port. Parallel (Printer) Port (25-pin female) ASUS TUSI-M User’s Manual...
Page 28
COM 1 Serial Port (9-pin male) PIN 1 TUSI-M ® TUSI-M Serial Port Header 7) Monitor Output Connector (Blue 15-pin VGA1) This connector is for output to a VGA-compatible device. VGA Monitor (15-pin female) ASUS TUSI-M User’s Manual...
Line In (light blue) allows tape players or other audio sources to be re- corded by your computer or played through the Line Out (lime). Mic (pink) allows microphones to be connected for inputting voice. Line Out Line In 1/8" Stereo Audio Connectors ASUS TUSI-M User’s Manual...
Page 30
(Pin 5 is removed to prevent inserting in the wrong orienta- tion when using ribbon cables with pin 5 plugged). NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. TUSI-M ® PIN 1 TUSI-M Floppy Disk Drive Connector ASUS TUSI-M User’s Manual...
Page 31
NOTE: The “Rotation” signal is to be used only by a specially designed fan with rotation signal. The Rotations per Minute (RPM) can be monitored using ASUS PC Probe or Intel LDCM Utility. WARNING! The CPU and/or motherboard will overheat if there is no airflow across the CPU and onboard heatsinks.
15) Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the system when a wakeup packet or signal is received through the LAN card.
Page 33
(such as a phone) and mono_out (such as a speaker) between the onboard audio and a voice modem card. MODEM AUX In (White) CD In (Black) TUSI-M ® TUSI-M Internal Audio Connectors ASUS TUSI-M User’s Manual...
Page 34
I/O ports, status LEDs, and space reserved for a hard disk drive. If you are not using an ASUS iPanel, you can connect an optional wireless transmitting and receiving infrared module to the SIR connector or an...
Page 35
+3.3 Volts TUSI-M ® TUSI-M ATX Power Connector 21) Power Supply Thermal Connector (2-pin PWRTMP) This connector connects to an ATX power supply. The plug from the power sup- ply will only insert in one orientation because of the different hole sizes. Find the proper orientation and push down firmly making sure that the pins are aligned.
Page 36
SMI Lead Switch* Requires an ATX power supply. TUSI-M System Panel Connectors 22) System Warning Speaker Connector (4-pin SPEAKER) This 4-pin connector connects to the case-mounted speaker. Two sources (LINE_OUT and SPEAKER) will allow you to hear system beeps and warn- ings.
No DRAM installed or detected One long beep followed by Video card not found or video card three short beeps memory bad High frequency beeps when CPU overheated system is working System running at a lower frequency ASUS TUSI-M User’s Manual...
Page 38
Shut Down, and then click Shut down the computer? The power supply should turn off after Windows shuts down. NOTE: The message “You can now safely turn off your computer” will not appear when shutting down with ATX power supplies. ASUS TUSI-M User’s Manual...
4. In DOS mode, type A:\AFLASH <Enter> to run AFLASH. IMPORTANT! If “unknown” is displayed after Flash Memory:, the memory chip is either not programmable or is not supported by the ACPI BIOS and there- fore, cannot be programmed by the Flash Memory Writer utility. ASUS TUSI-M User’s Manual...
BIOS revision will solve your problems. Care- less updating can result in your motherboard having more problems! 1. Download an updated ASUS BIOS file from the Internet (WWW or FTP) (see ASUS CONTACT INFORMATION on page 3 for details) and save to the disk you created earlier.
Page 41
ROM. The boot block will be updated automatically only when neces- sary. This will minimize the chance that a failed update will prevent your system from booting up. When the programming is finished, Flashed Successfully will be displayed. ASUS TUSI-M User’s Manual...
Page 42
If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need servicing. ASUS TUSI-M User’s Manual...
POST. NOTE: Because the BIOS software is constantly being updated, the following BIOS screens and descriptions are for reference purposes only and may not re- flect your BIOS screens exactly. ASUS TUSI-M User’s Manual...
Brings up a selection menu for the highlighted field <Home> or <PgUp> Moves the cursor to the first field <End> or <PgDn> Moves the cursor to the last field <F5> Resets the current screen to its Setup Defaults <F10> Saves changes and exits Setup ASUS TUSI-M User’s Manual...
Item Specific Help window located to the right of each menu. This window displays the help text for the currently highlighted field. NOTE: The item heading in square brackets represents the default setting for that field. ASUS TUSI-M User’s Manual...
This is required to support older Japanese floppy drives. Floppy 3 Mode support will allow reading and writing of 1.2MB (as opposed to 1.44MB) on a 3.5-inch diskette. Configuration options: [Disabled] [Drive A] [Drive B] [Both] ASUS TUSI-M User’s Manual...
Primary IDE hard disk drives must have its partition set to active (also possible with FDISK). Other options for the Type field are: [None] - to disable IDE devices ASUS TUSI-M User’s Manual...
Page 48
NOTE: To make changes to this field, the Type field must be set to [User Type HDD] and the Translation Method field must be set to [Manual]. ASUS TUSI-M User’s Manual...
Page 49
IDE devices. Set to [Disabled] to suppress Ultra DMA capa- bility. NOTE: To make changes to this field, the Type field must be set to [User Type HDD]. Configuration options: [0] [1] [2] [3] [4] [Disabled] ASUS TUSI-M User’s Manual...
[6/Sec] [8/Sec] [10/Sec] [12/Sec] [15/Sec] [20/Sec] [24/Sec] [30/Sec] Keyboard Auto-Repeat Delay [1/4 Sec] This field sets the time interval for displaying the first and second charac- ters. Configuration options: [1/4 Sec] [1/2 Sec] [3/4 Sec] [1 Sec] ASUS TUSI-M User’s Manual...
Page 51
Configuration options: [All Errors] [No Error] [All but Keyboard] [All but Disk] [All but Disk/Keyboard] Installed Memory [XXX MB] This display-only field displays the amount of conventional memory detected by the system during bootup. You do not need to make changes to this field. ASUS TUSI-M User’s Manual...
CPU Level 1 Cache, CPU Level 2 Cache [Enabled] These fields allow you to choose from the default of [Enabled] or choose [Disabled] to turn on or off the CPU’s Level 1 and Level 2 built-in cache. Configuration options: [Disabled] [Enabled] ASUS TUSI-M User’s Manual...
Page 53
USB device or not. Configuration options: [Disabled] [Enabled] [Auto] OS/2 Onboard Memory > 64M [Disabled] When using OS/2 operating systems with installed DRAM of greater than 64MB, you need to set this option to [Enabled]; otherwise, leave this on [Disabled]. Configuration options: [Disabled] [Enabled] ASUS TUSI-M User’s Manual...
Page 54
If your system crashes or hangs due to improper frequency settings, power OFF your system and restart. The system will start up in safe mode running at a bus speed of 66MHz and enter BIOS setup. ASUS TUSI-M User’s Manual...
SDRAM Configuration is set to [User Define]. SDRAM RAS Precharge Time This controls the idle clocks after issuing a precharge command to the SDRAM. NOTE: This field will only be adjustable when SDRAM Configuration is set to [User Define]. ASUS TUSI-M User’s Manual...
Page 56
Configuration options: [Disabled] [Enabled] ISA Bus Clock [PCICLK/4] This function allows you to set the ISA bus clock frequency. [PCICLK/4] sets your ISA bus at a quarter speed of the PCI bus. Configuration options: [PCICLK/4] [7.159MHz] ASUS TUSI-M User’s Manual...
Page 57
Onboard PCI Audio Controller [Enabled] This motherboard has enbedded PCI audio controller. If you want to use it, leave on the default setting [Enabled]. If you want to use an add-on audio card, select [Disabled]. Configuration options: [Disabled] [Enabled] ASUS TUSI-M User’s Manual...
UART to support the infrared module connector on the motherboard. If your system already has a second serial port connected to the onboard COM2 connector, it will no longer work if you enable the infrared feature. Configuration options: [Disabled] [Enabled] ASUS TUSI-M User’s Manual...
Page 59
This field allows you to configure the parallel port DMA channel for the selected ECP mode. This selection is available only if you select [ECP] or [ECP+EPP] in Parallel Port Mode above. Configuration options: [1] [3] ASUS TUSI-M User’s Manual...
[Disabled] will disable the motherboard’s Symbios SCSI BIOS so that the BIOS on an add-on Symbios SCSI card can be used. If your Symbios SCSI card does not have a BIOS, the Symbios SCSI card will not function. Con- figuration options: [Auto] [Disabled] ASUS TUSI-M User’s Manual...
(non-PnP) device. The default value indicates either that the displayed IRQ is not used or that ISA Configuration Utility (ICU) is being used to determine if a legacy device is using that IRQ. Configuration options: [No] [Yes] ASUS TUSI-M User’s Manual...
ROMs on them, you will need to know which addresses the ROMs use to shadow them specifically. Shadowing a ROM reduces the memory available between 640K and 1024K by the amount used for this purpose. Configuration options: [Disabled] [Enabled] ASUS TUSI-M User’s Manual...
Windows 3.x and Windows 95, you need to install Windows with the APM feature. For Windows 98 and later, APM is automatically installed. A battery and power cord icon labeled “Power Management” will appear in the “Control Panel.” Choose “Advanced” in the Power Management Properties dialog box. ASUS TUSI-M User’s Manual...
Page 64
4 seconds will place the system in sleep mode. Regardless of the setting, holding the ATX switch for more than 4 seconds will power off the system. Configuration options: [Soft off] [Suspend] ASUS TUSI-M User’s Manual...
Con- figuration options: [Disabled] [Enabled] IMPORTANT: This feature requires an optional network interface card with Wake- On-LAN and an ATX power supply with at least 720mA +5V standby power. ASUS TUSI-M User’s Manual...
Page 66
[By Date]. NOTE: Automatic Power Up will not work if the system is powered down by operating sys- tems, such as Windows 98, which have ACPI support enabled. Configura- tion options: [Disabled] [Everyday] [By Date] ASUS TUSI-M User’s Manual...
NOTE: If any of the monitored items is out of range, an error message will appear: “Hardware Monitor found an error. Enter Power setup menu for details”. You will then be prompted to “Press F1 to continue, DEL to enter SETUP”. ASUS TUSI-M User’s Manual...
This field allows you to select which ATAPI CD-ROM drive to use in the boot sequence. Pressing [Enter] will show the product IDs of all your con- nected ATAPI CD-ROM drives. Other Boot Device Select [INT18 Device (Network)] Configuration options: [Disabled] [SCSI Boot Device] [INT18 Device (Net- work)] ASUS TUSI-M User’s Manual...
Page 69
Boot Up Floppy Seek [Enabled] When enabled, the BIOS will seek the floppy disk drive to determine whether the drive has 40 or 80 tracks. Configuration options: [Disabled] [Enabled] Full Screen Logo [Enabled] Configuration options: [Disabled] [Enabled] ASUS TUSI-M User’s Manual...
This option should only be used if you do not want to save the changes you have made to the Setup program. If you have made changes to fields other than system date, system time, and password, the system will ask for con- firmation before exiting. ASUS TUSI-M User’s Manual...
This option saves your selections without exiting the Setup program. You can then return to other menus and make changes. After selecting this op- tion, all selections are saved and a confirmation is requested. Select [Yes] to save any changes to the non-volatile RAM. ASUS TUSI-M User’s Manual...
Page 72
4. BIOS SETUP (This page was intentionally left blank.) ASUS TUSI-M User’s Manual...
NOTE: Because there are various motherboard settings, options, and expansion cards, the following can only be used as a general reference and may not reflect exactly the screen contents displayed on your screen. ASUS TUSI-M User’s Manual...
NOTE: If you do not see this item, set Onboard LAN to Enabled in BIOS setup (see 4.4.1 Chip Configuration). • ASUS PC Probe Vx.xx: Installs a utility to monitor your computer’s fan, tem- perature, and voltages. • Install ASUS Update Vx.xx: Installs a program to help you update your BIOS or download a BIOS image file.
ASUS Utility, and then click Probe Vx.xx. The PC Probe icon will appear on the taskbar’s system tray indicating that ASUS PC Probe is running. Clicking the icon will allow you to see the status of your PC. ASUS TUSI-M User’s Manual...
6. SOFTWARE REFERENCE 6.1.2 Using ASUS PC Probe Monitoring Monitor Summary Shows a summary of the items being monitored. Temperature Monitor Shows the PC’s temperature (for supported processors only). Temperature Warning threshold adjustment (Move the slider up to increase the...
Page 77
NOTE: This feature is not available on ASUS Probe version 2.12.01/2.12.02 Information Hard Drives Shows the used and free space of the PC’s hard disk drives and the file allo- cation table or file system used. ASUS TUSI-M User’s Manual...
Page 78
CPU type, CPU speed, and in- ternal/external frequencies, and memory size. Utility Lets you run programs outside of the ASUS Probe modules. To run a program, click Execute Program. NOTE: This feature is currently unavailable. ASUS TUSI-M User’s Manual...
6. SOFTWARE REFERENCE 6.1.3 ASUS PC Probe Task Bar Icon Right clicking the PC Probe icon will bring up a menu to open or exit ASUS PC Probe and pause or resume all sys- tem monitoring. When the ASUS PC Probe...
Backstep Frame Step Frame Previous Next Play Stop Configuration i-Power! Increase Volume CD Mode Mute Shuffle Decrease Volume Karaoke Next angle Next audio stream Next subtitle Add bookmark Capture frame Go-Up Repeat Menu Go to bookmark ASUS TUSI-M User’s Manual...
VLM 3 supports all the hardware devices that are compliant with Video for Win- dows standard. Video for Windows is a well-accepted and well-tested standard. Thus, users do not have to worry about compatibility issues. ASUS TUSI-M User’s Manual...
Start Playback Save Video File Snapshot to File Stop Recording / Playback Send Mail Start Recording Video Configuration Load Video File Pause Send Mail Increase MIC volume Decrease MIC volume Increase speaker volume Decrease speaker volume ASUS TUSI-M User’s Manual...
6. SOFTWARE REFERENCE 6.4 ASUS Live Update ASUS LiveUpdate is a utility that allows you to update your motherboard’s BIOS and drivers. The use of this utility requires that you are properly con- nected to the Internet through an Internet Service Provider (ISP).
1. Select the type of monitor connected to the computer, either CRT or LCD. 2. Follow the instructions to manually adjust the brightness level of the monitor. 3. Select the faintest of the three colors: blue, red and green. ASUS TUSI-M User’s Manual...
Using the Windows Start button, activate the 3Deep Control Panel program from the 3Deep Applications group on the Main Program menu. The control panel offers access to the Color Wizard tuning program, a Game Gamma setting and a Tweak slider for brightness adjustment. ASUS TUSI-M User’s Manual...
In 16-color and 8-bit color (256-color) modes, gamma correction function is not supported. Sets the preferred tint of your display Sets your monitor’s Permits individual color mapping channel tuning Restores settings to the original program default ASUS TUSI-M User’s Manual...
Page 87
Color makes visual adjustments, such as brightness, for all of the RGB colors. Sets the brightness of 3D displays. Changes to settings Previews fullscreen can be previewed changes. Press the on the displayed 3D Esc key to go back scene to this dialog box. ASUS TUSI-M User’s Manual...
Page 88
D3D supplies basic and advanced performance settings for D3D games. Sets the D3D performance of 3D scenes. Setting the speed to a higher setting results in a trade-off in display quality. Previews changes. Press the Esc key to go back to this dialog box. ASUS TUSI-M User’s Manual...
Page 89
OpenGL supplies texture and other performance settings for compatible applications. Information Information lists the relevant information about your card, such as the chip type, soft- ware and driver versions, memory size, video memory clock speed, and the drivers. ASUS TUSI-M User’s Manual...
Page 90
6. SOFTWARE REFERENCE (This page was intentionally left blank.) ASUS TUSI-M User’s Manual...
BIOS Setup program. The BIOS can be updated using the provided utility to copy a new BIOS file into the EEPROM. Bit (Binary Digit) Represents the smallest unit of data used by the computer. A bit can have one of two values: 0 or 1. ASUS TUSI-M User’s Manual...
Page 92
ROM can be electrically erased. Flash ROM is normally used for system BIOS, which initiates hardware devices and sets up necessary parameters for the OS. Since the flash ROM contents can be modified, users can easily update the BIOS.. ASUS TUSI-M User’s Manual...
Page 93
POST (Power On Self Test) Powering on the computer initiates the POST, a series of software-controlled diagnostic tests. The POST checks system memory, the motherboard circuitry, the display, the keyboard, the diskette drive, and other I/O devices ASUS TUSI-M User’s Manual...
Page 94
12Mbit/sec. USB 2.0 provides twice the transfer rate com- pared to USB 1.0 and competes with the 1394 standard. Wake-On-LAN Computer will automatically wake-up upon receiving a wake-up packet through a Network interface when it is under power soft-off, suspend or sleep mode. ASUS TUSI-M User’s Manual...
3Deep Color Tuner Discard Changes 71 Using 84 ECP DMA Select 59 AC PWR Loss Restart 65 Exit Discarding Changes 70 ASUS iPanel Audio Connector 34 Exit Saving Changes 70 ASUS iPanel Connector 34 Expansion Cards ASUS PC Probe AMR 25...
Page 96
PWR Button < 4 Secs 64 -12 67 PWR Up On Modem Act 65 -5 67 VCORE 67 Quick Power On Self Test 69 Wake On LAN 65 Wake-On-LAN Connector 32 Removable Device 68 Wake-On-Ring Connector 32 ASUS TUSI-M User’s Manual...