Adjusting The Image - Axis 26031R3 User Manual

Adjusting the image

Tilt
adjustment
screw
Locking screw
1. Open the Live View page in the Web interface and make the following adjustments on
the camera:
2. Loosen the locking screw and tilt adjustment screws.
3. Turn the lens to the desired position.
4. Once satisfied, gently tighten the locking screw and tilt adjustment screws to secure the
camera's position.
5. Turn the image balance ring to set the horizontal position.
6. Open the Focus Adjustment page in the Web interface under Basic Configuration >
Focus and follow the on-screen instructions. Use the image window to adjust the focus
and zoom.
• To set the focus and zoom, loosen the zoom and focus pullers counterclockwise and
rotate the rings.
• Lock the focus and zoom pullers in position by rotating the screws clockwise.
Image
balance
ring
AXIS 216FD - Accessing the Camera
Focus
puller
Zoom puller
Tilt
adjustment
screw
11