Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
+
-
1. The Model 091-137 Battery Saver Filter is designed to filter the full wave rectified,
unfiltered D.C. Output of the Battery Saver. The output is a low ripple 13.8 VDC.
2. Install the filter in a convenient, dry location and wire as illustrated in the diagram
above. Use #18 AWG minimum wire size for wire runs up to 15 feet. Longer
distances require a larger wire size.
3. Note that the maximum current capacity of the filter is 3 amps. For higher currents
use 2 or more filters may be connected in parallel.
SINCE 1967, DESIGNERS OF INNOVATIVE PRODUCTS
KUSSMAUL ELECTRONICS COMPANY, INC.
170 CHERRY AVENUE, WEST SAYVILLE, NEW YORK, 11796-1221 USA
TEL. In NY:
FEB. 7, 2003
+
-
BATTERY SAVER FILTER
Model 091-137
IN
OUT
631 567-0314
BATTERY SAVER FILTER
Model 091-137
IN
OUT
BATTERY SAVER FILTER
Model 091-137
IN
OUT
TOLL FREE:
800 346-0857
Typical Installation
single filter, 3 amp or
less load.
+
-
Typical Installation
6 ampere load
2 filters in parallel
+
-
FAX:
631 567-5826
Advertisement
