DirecTV HR20 User Manual page 153

1. DOOR PANEL, USB PORT –
2. POWER –
Turns your DIRECTV Plus
off. The power light flashes when you press a key on the remote to let you know it has received the command.
3. REMOTE SENSOR –
The infrared sensor picks up commands from the remote control. You cannot have any opaque object
between the remote and this sensor or else the command will not get through. If you have an optional RF remote, this sensor is not
used. With an optional RF remote you can place your receiver inside a cabinet or any non-metal enclosure and it will receive the
remote control commands up to 200 feet away.
4. GUIDE –
Displays the onscreen program guide.
5. MENU –
Brings up the Main Menu to access settings and services.
6. REC –
This button lights orange to indicate a recording is in progress.
7. SELECT –
Selects the item highlighted.
8. ACTIVE –
Displays the DIRECTV Interactive Home Page - local weather and more!
9. INFO –
Displays channel banner or info for a highlighted program or channel cell.
10. DOOR PANEL –
The access card slot, RESET button, receiver ID and model number are located behind the door panel.
For future use. USB 2.0 Host(FRONT/REAR EACH 5V = 500mA)
DVR on or off. Your DIRECTV Plus
®
Appendix 1: Receivers Front and Back Panels
DVR still records and receives messages when powered
®
153