DirecTV HR20 User Manual page 151

1. SATELLITE IN 1 (SWM-2) –
applicable, is made to this satellite in port.
2. SATELLITE IN 2 –
Connect the second line from your satellite dish here.
3. S-VIDEO OUT –
A Standard-Definition video output.
4. RCA-Audio/Video Jacks –
feed a VCR or DVD player/burner.
5. COMPONENT VIDEO OUT–
connectors below it for analog audio out.
6. DIGITAL AUDIO OUT COAXIAL –
7. DIGITAL AUDIO OUT OPTICAL –
8. HDMI –
Use this combination digital video and audio connector for the best picture quality.
9. ETHERNET –
Please refer to Appendix 2 for information on networking options on your HD DVR before connecting anything to the
Ethernet port.
10. USB –
For future use. USB 2.0 Host(FRONT/REAR EACH 5V = 500mA)
11. SATA –
Use this connector to add an external hard drive to your receiver.
12. PHONE JACK –
Connect your phone line here to enable Pay Per View purchasing and Caller ID (if your phone service package
includes it).
13. POWER –
Your receiver must be plugged in at all times to function properly.
Connect one line from your satellite dish here. A Single Wire Multi-Switch (SWM) connection, if
Standard-Definition output. You can use the entire row of RCA connectors (yellow, white and red) to
Use this block to connect up component video cables (green, blue, red) and use the white and red RCA
Use this digital audio connection for sound.
Use this digital audio connection for sound.
Appendix 1: Receivers Front and Back Panels
151