Setup And Activation; Setup And Activation; Guided Setup; Activate Your Directv ® Service - DirecTV H20 User Manual

Setup and Activation

Guided Setup

If your receiver was not professionally installed, or you have had to reset your receiver for any reason, you will need to follow the guided
setup screens before starting DIRECTV service.
1.
Make sure the MODE switch at the top of the remote control is set to DIRECTV, which is the far-left position.
2.
Press PWR. The DIRECTV
3.
The first screen will allow you to select a language. Using the arrow keys on the remote control, move to the language you prefer
and press SELECT.
4.
Follow the onscreen instructions.
After these setup procedures are complete, you'll see a message onscreen that says, "Acquiring Satellite Info". Your receiver is
gathering information from the satellite for the onscreen program guide. Next you'll be asked in you want to program your remote to
control other equipment such as your TV and/or DVR player.
Activate Your DIRECTV
Once all the setup processes are complete, all that's left to do is activate your DIRECTV
1.
Have on hand your service address, social security number and a valid major credit card.
2.
Note your receiver ID and access card numbers. The receiver ID is on a sticker behind the access card door on the front of the
receiver, while the card number is on the access card itself. Use the Product Information page to note this information.
3.
When you're ready, just call 1-800-531-5000 to pick the programming package that's right for you and subscribe to DIRECTV
service.
DIRECTV NON-DVR
®
52
Receiver will turn on. (Make sure your TV is also turned on!)
®
Service
®
USER GUIDE
service. Be sure to:
®