Removing Front-Mounted Handles For Stainless Steel Door; Installing Front-Mounted Handles For Stainless Steel Freezer Door; Removing Front-Mounted Handles For Stainless Steel Freezer Door; Connecting The Water Supply - Maytag MFD2561HE - 36" Bottom-Freezer Refrigerator Use & Care Manual

Installation
Removing Front-Mounted Handles for
Stainless Steel Doors
1. Remove plastic button plug at base
of handle with a very small fiat-blade
screwd river.
Insert phillips screwdriver into
predrilled hole to remove screw.
2. Slide handle down and remove
from door clip.
3. Repeat above steps to remove
other handle.
Removing Front-Mounted Handles for
Stainless Steel Freezer Door
1. Remove right side plastic button __
plugs at each end of handle _,,_,,,
with a very small flat-blade
screwdriver.
• Insert phillips screwdriver _'_/
into predrilled hole to remove
screw.
2. Slide handle dght and
remove from door clip.
\
Installing Front-Mounted Handles for
Stainless Steel Freezer Door
]. Loosen lower door clip on door
with a phillips screwdriver
2. Locate predrilled hole at base of
handle, and fit hollow end of
handle over left door clip.
\
Connecting the Water Supply
3. Fit other end of handle over
left door clip and slide left as
far as possible.
NOTE: If end of handle does \
not fit over left clip, loosen
dght clip further until fit can
be accomplished.
4. Insert phillips screwdriver
into preddlled hole at end of
handle to tighten screw.
Insert plastic button plug into
hole.