Running The Interactive Setup; Getting Antenna Information - Toshiba DW65X91 Owner's Manual

GETTING ASSISTANCE

RUNNING THE INTERACTIVE SETUP

You should have completed the interactive setup the first time you plugged in your TV.
However, if you need to access the interactive setup again, you can access it through the
Assistance menu.
1. Press MENU on the remote control to access the main menu.
2. Select Assistance from the main menu.
3. Select Interactive Setup and follow the on-screen directions.
RTN Help
1 Interactive Setup
2 Antenna info
3 Dish Pointing...
4 New Access Card
5 System Test
6 Off-Air Guides
7 Upgrades...
The interactive setup process allows you to
complete all steps or selectively skip steps.
The steps involved in the interactive setup include:
• Setting the time and date
• Searching for channels
• Setting up speakers
• Selecting an audio processor
Note that if you do not subscribe to DIRECTV
step" for running the system test.

GETTING ANTENNA INFORMATION

The Antenna Info menu helps you measure the strength of all available TV channels. It
will help you adjust any off-air TV antennas. (The actual adding of channels is done by
using the Channel Search menu.)
To access the Antenna Info menu:
1. Press MENU to bring up the main menu.
2. Select Assistance.
3. Then select Antenna Info.
A dialog box reports the status of the signal search and lists channels that are being
received or have been received from all off-air antennas. To switch between antennas,
highlight a channel and then press ANTENNA on the remote control.
82
• Specifying your satellite dish antenna type
• Entering Zip Code
• Running the Signal Meter
• Running the system test
® programming, you can select "Skip this
If you decide to subscribe to
DIRECTV, we strongly recommend
that you have the satellite system
professionally installed.
Installation can be arranged through
the dealer where the TV was
purchased.